Dear Aspirants,
The forward voltage at which the current through the junction starts increasing rapidly is called the knee voltage or cut-in voltage. For a bias less than the Peak Inverse Voltage, the reverse current is very small. Therefore there will be a definite forward voltage at which the diode starts to conduct significantly.
What is the main function of a diode?
The most common function of a diode is to allow an electric current to pass in one direction (called the diode's forward direction), while blocking it in the opposite direction (the reverse direction). As such, the diode can be viewed as an electronic version of a check valve.
What is cut in and cut out voltage?
In batteries, the cut-off (final) voltage is the prescribed lower-limit voltage at which battery discharge is considered complete. The cut-off voltage is usually chosen so that the maximum useful capacity of the battery is achieved.
What is the cut-in voltage of the PN junction diode?
This voltage is also known as cut-in voltage. This voltage is the least reverse voltage at which the PN Junction can behave without harm to the current. It is the position within the forward bias of the curve wherever conduction begins to raise quickly of a PN-Junction Diode.
What is cut-off voltage in a diode?
One is the forward voltage cut off: a forward voltage below about 0.7 V for a silicon diode, 0.3 V for germanium, and 0.15 V for a Shockey diode. In this range of voltages, the diode does not allow a current to flow through it and it is "cut off".
What is meant by Zener voltage?
The Zener voltage is the voltage at which the depletion region completely vanishes. The reverse bias applies across the diode increases the intensity of the electric field across the depletion region. Thus, it allows the electrons to move from the valence band of P-type material to the conduction band of N-type material.
What is the Zener breakdown voltage?
The Zener Breakdown is observed in the Zener diodes having Vz less than 5V or between 5 to 8 volts. When a reverse voltage is applied to a Zener diode, it causes a very intense electric field to appear across a narrow depletion region.
What are the types of diodes?
Types of Diodes | Small Signal, LED, Schottky, Zener
Small Signal Diode.
Large Signal Diode.
Zener Diode.
Light Emitting Diode (LED)
Constant Current Diodes.
Schottky Diode.
Shockley Diode. Shockley Diode Applications.
What are the Zener effect and the Avalanche effect?
The Zener effect is distinct from avalanche breakdown. The avalanche breakdown occurs in lightly doped junctions, which produce a wider depletion region. Temperature increase in the junction increases the contribution of the Zener effect to breakdown and decreases the contribution of the avalanche effect.
Step Recovery Diodes.
What are the characteristics of diode?
Basic static characteristics of diodes are the forward voltage VF and forward current IF, and the reverse voltage and current VR and IR. The area surrounded by the orange dashed line in the diagram on the right indicates the usable area of rectifying diodes.
Some Imporatant links
Best FREE Deals & Discounts
"Sharing knowledge is the greatest pleasure of LIFE"
Thanks & Regards
Nani
Post a Comment
If you have a query, let us know.